Pluggable terminal block used to connect or disconnect electrical equipment and installations in a fast way.
- Moulding: polyamide 6, natural colour. V2 (according to UL 94).
- Insert: nickel-plated brass.
- Screws: zinc-plated steel. Metric thread.
- Glow-wire test 960ºC according to EN 60695-2-11.
Terminal strips for fast and simple plug and unplug of circuits made of copper conductors.
Supplied in male-female sets, in 12 poles.
Available pre-cut upon request.
Plug in Terminal Strip
Connection capacity:
- Solid cable: 2,5 mm² / 1 mm²
- Flexible cable: 2,5 mm² / 1 mm²
Voltage: 450 V
Temperature: 110ºC
Constructive:
- Standard model: 12 poles.
- Models with a smoller number of poles can be made.
- In order to guarantee a correct connexion the use of a strip up to a maximun of 4 poles is recommended, since the contacts are not provided with a wide.
- Terminal strips can be printed on request.
- Wiring may be made before the assembly of the electical installation.
- Plug in terminal strips allow fast connection and disconnection.
- Captive screws.
- Raised screws, providing an easier insertion of the conductor.
Intensity: 6A
Tightening torque: 0,5 Nm
Metrics: M 3
Plug in Terminal Strip
Connection capacity:
- Solid cable: 6 mm² / 2,5 mm²
- Flexible cable: 4 mm² / 2,5 mm²
Voltage: 450 V
Temperature: 110ºC
Constructive:
- Standard model: 12 poles.
- Models with a smoller number of poles can be made.
- In order to guarantee a correct connexion the use of a strip up to a maximun of 4 poles is recommended, since the contacts are not provided with a wide.
- Terminal strips can be printed on request.
- Wiring may be made before the assembly of the electical installation.
- Plug in terminal strips allow fast connection and disconnection.
- Captive screws.
- Raised screws, providing an easier insertion of the conductor.
Intensity: 10A
Tightening torque: 0,5 Nm
Metrics: M 3
Plug in Terminal Strip
Connection capacity:
- Solid cable: 10 mm² / 4 mm²
- Flexible cable: 6 mm² / 4 mm²
Voltage: 450 V
Temperature: 110ºC
Constructive:
- Standard model: 12 poles.
- Models with a smoller number of poles can be made.
- In order to guarantee a correct connexion the use of a strip up to a maximun of 4 poles is recommended, since the contacts are not provided with a wide.
- Terminal strips can be printed on request.
- Wiring may be made before the assembly of the electical installation.
- Plug in terminal strips allow fast connection and disconnection.
- Captive screws.
- Raised screws, providing an easier insertion of the conductor.
Intensity: 16A
Tightening torque: 0,8 Nm
Metrics: M 3,5
